|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
We produce uniform ink through the most up-to date facilities and strict process controls, and provide our customers with trustworthy products after by intensive quality analysis. 
|
REVERSE LAMINATE INKS (for wide range of films) |
|
 DESCRIPTION
The inks are formulated for printing on various kinds of films with very low residual solvents.
SPECIFICATIONS
|
PRODUCT NAME |
CHARACTERISTIC |
REDUCER |
LAMINATE |
RESISTANCE |
|
DL / NSDL |
EXTRUSION |
LOW RESIDUAL SOLVENT |
WATER / OIL / BOIL / RETORT POUCH |
|
PEEL |
|
DAMOA |
One component
Non-Toluene |
MEK: 50%
EAC: 50% |
Good |
Good |
Good |
Good |
|
PENY-NT |
Two component
Non pot life |
TOL: 40% MEK:40%
EAC: 20% |
Good |
Good |
Good |
Good |
|
CORRE-SPONDENCE |
- Urethane resin base ink
- Wide range of substrates (OPP, PET, NYLON, PT-Cellophane)
- Very low residual solvent
- Excellent for boiling resistance
- Good for high printing speed (120 - 240M/Min.)
|
APPLICATION INFORMATION
Suitable for printing on wide range of films such as OPP, PET, NYLON and PT-Cellophane.
CAUTION
- Use the recommended thinner only.
- Prohibit mixing with any other inks.
- For PENY-NT series, keep the mixing ratio of ink & hardener(Ink : hardener= 100 : 4)
- Keep the aging time after print (24hr / 40 degrees Celsius)
- Should not add any extra water into the ink that is mixed with hardener.
|
|
REVERSE LAMINATE INKS (for OPP film) |
|
DESCRIPTION The inks are formulated for printing on (B)OPP film with excellent printability.
SPECIFICATIONS
|
PRODUCT
NAME |
CHARACTERISTIC |
REDUCER |
LAMINATE |
RESISTANCE |
|
DRY LAMI |
NSDL |
EXTRUSION |
LOW RESIDUAL SOLVENT |
WATER |
OIL |
|
PEEL |
PPEL |
|
LPNS |
Vinyl, EVA, CL-PP resin base
Excellent printing stability |
TOL: 80% ACT: 20% |
Good |
Normal |
Good |
Bad |
Bad |
Normal |
Bad |
|
LP-TOP |
Vinyl, CL-PP resin base
Excellent printing stability
Very low residual solvent in printed film |
TOL: 30% MEK:30% EAC: 40% |
Good |
Good |
Good |
Bad |
Good |
Normal |
Bad |
|
LP-PP |
CL-Eva, CL-PP resin base
High density
Good laminate quality for PPEL |
Good |
Normal |
Excell-ent |
Excell-ent |
Good |
Normal |
Bad |
|
NT |
Urethane resin base
Non-toluene type
Safe for food packing |
MEK:50% EAC :50% |
Excell
-ent |
Excell
-ent |
Good |
Bad |
Excellent |
Normal |
Good |
APPLICATION
Printing on (B)OPP film for package of noodle, snack, etc in flexible packaging.
CAUTION
- Use the recommended thinner only.
- Prohibit mixing with any other inks.
- Our technical staff will be pleased to give you assistance .
- Many special colors can be matched on request.
|
|
REVERSE LAMINATE INKS (for Nylon & PET film) |
|
DESCRIPTION This ink are formulated for printing on Nylon and PET films with excellent printability.
SPECIFICATIONS
|
PRODUCT
NAME |
CHARACTERISTIC |
REDUCER |
LAMINATE
(DL, PEEL) |
RESISTANCE |
|
LOW Residual solvent |
WATER |
OIL |
BOIL |
RETORT POUCH |
|
PET(R) |
Vinyl, Urethane resin base
Two component
Excellent for Hi-retort pouch |
TOL : 40% MEK :40% EAC : 20% |
Good |
moderate |
Good |
Excel
-lent |
Excel
-lent |
Excel
-lent |
|
PENY |
Two component type
Non pot life |
TOL : 40% MEK :40% EAC : 20% |
Good |
Good |
Good |
Good |
Good |
Good |
APPLICATION INFORMATION
Printing on NYLON and PET films for boiling, retort, oil food packaging.
CAUTION
- Use the recommended thinner only.
- Prohibit mixing with any other inks.
- Should use hardener (Lami 60) to print on NYLON film and Retort Pouch PET film required excellent lamination strength (Ink : hardener = 100 : 4)
- Keep the aging time after print (24hr / 40 degrees Celsius)
- Please ask of our technician before using an extra ink already mixed with hardener.
- Our technical staff will be pleased to give you assistance.
- Many special colors can be matched on request.
|
|
REVERSE LAMINATE INKS (for Cellophane & PS films) |
|
DESCRIPTION This ink is formulated for printing on Cellophane and PS films with excellent printability.
SPECIFICATIONS
|
PRODUCT NAME |
CHARACTERISTIC |
REDUCER |
LAMINATE |
RESISTANCE |
|
DRY LAMI |
NSDL |
EXTRUSION |
LOW RESIDUAL SOLVENT |
WATER |
OIL |
|
PEEL |
|
PT |
Nitro Cellulose resin base
PT-Cellophane film ink
Good for blocking resistance |
TOL: 60% IPA : 30% EAC: 10% |
Normal |
Normal |
Moderate |
Normal |
Bad |
Good |
|
MSAT |
Moisture proof Cellophane ink |
Normal |
Normal |
Good |
Good |
Good |
Good |
|
LP-CPS |
Alcohol soluble acrylic resin base
Good for heat lamination with HIPS film |
IPA : 70% EAC: 30% |
Good |
Normal |
Bad |
Normal |
Good |
Good |
APPLICATION
- PT & MSAT are printable on Cellophane film (ex. Tea bag)
- LP-CPS is printable on Polystyrene film.
CAUTION
- Use the recommended thinner only.
- Prohibit mixing with any other inks.
- Should be aware of blushing problem because this ink is sensitive with humidity.
- Our technical staff will be pleased to give you assistance.
|
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page